How to Communicate Conzerv EM6436 to Modbus Poll Software Using PAS600 EcoStruxure Panel Server?

4 February 2023 admin EMS 0

 

To communicate the Conzerv EM6436 meter to Modbus Poll
software using the PAS600 EcoStruxure Panel Server, you will need to follow
these steps:

  1. Connect the Conzerv EM6436 meter to the PAS600 EcoStruxure
    Panel Server using the appropriate communication method (serial or Ethernet).
  2. Configure the PAS600 EcoStruxure Panel Server to act as a
    Modbus RTU/TCP gateway by setting the appropriate communication parameters and
    enabling the Modbus RTU/TCP protocol.
  3. Start Modbus Poll software and select the appropriate
    communication method (Serial RTU or TCP/IP) that matches your connection to the
    PAS600 EcoStruxure Panel Server.
  4. Enter the PAS600 EcoStruxure Panel Server’s IP address or
    serial port information as the device address.
  5. Set the function code to 4 (Read Input Registers) or 3 (Read
    Holding Registers) depending on the type of data you want to retrieve.
  6. Enter the start address and number of registers to retrieve.
    You can find the register map for the Conzerv EM6436 meter in its manual.
  7. Click the “Poll” button to initiate the
    communication and retrieve the data from the meter through the PAS600
    EcoStruxure Panel Server.
  8. The retrieved data will be displayed in the data window of
    Modbus Poll.

Note: The exact steps and parameters may vary depending on
the specific version of the Conzerv EM6436 meter, PAS600 EcoStruxure Panel
Server, and Modbus Poll software you are using. Be sure to consult the manual and
technical documentation for each device and software for more detailed
information.

Additionally, to ensure successful communication between the
Conzerv EM6436 meter, the PAS600 EcoStruxure Panel Server, and Modbus Poll
software, it’s important to verify the following:

  1. The baud rate, data bits, stop bits, and parity settings
    match between the Conzerv EM6436 meter, PAS600 EcoStruxure Panel Server, and
    Modbus Poll software.
  2. The IP address and port number of the PAS600 EcoStruxure
    Panel Server are correctly configured in Modbus Poll software.
  3. The PAS600 EcoStruxure Panel Server is properly configured
    to forward the Modbus RTU/TCP communication to the Conzerv EM6436 meter.
  4. The Conzerv EM6436 meter is configured to respond to Modbus
    RTU/TCP requests.
  5. The firewalls, antivirus software, or other security systems
    on the computer running Modbus Poll and on the network are not blocking the
    communication.

By verifying these steps, you can ensure a
smooth and successful communication between the Conzerv EM6436 meter, PAS600
EcoStruxure Panel Server, and Modbus Poll software. more